945-13766-0000-000

Manufacturer
NVIDIA
Part Number
945-13766-0000-000
Description
NVIDIA Jetson Orin Nano Super Developer Kit with an 8GB LPDDR5 module, Ampere GPU and up to 67 INT8 TOPS for edge AI development.
Datasheet
Datasheet

945-13766-0000-000 Technical Specifications

Product NameJetson Orin Nano Super Developer Kit
Product TypeEdge AI Developer Kit
Included Compute ModuleJetson Orin Nano 8GB
AI PerformanceUp to 67 INT8 TOPS (sparse)
GPU ArchitectureNVIDIA Ampere
CUDA Cores1024
Tensor Cores32
CPU6-core Arm Cortex-A78AE, v8.2, 64-bit
CPU Maximum FrequencyUp to 1.7 GHz with supported Super settings
CPU Cache1.5 MB L2; 4 MB L3
Memory Capacity8 GB
Memory TypeLPDDR5
Memory Bus Width128-bit
Memory BandwidthUp to 102 GB/s with supported Super settings
Module Power Modes7 W / 15 W / 25 W
Software PlatformNVIDIA JetPack SDK
Storage SupportmicroSD card; external NVMe SSD
Storage IncludedmicroSD card and NVMe SSD are not included
M.2 Storage Slots1 x Key M 2280 (PCIe 3.0 x4); 1 x Key M 2230 (PCIe 3.0 x2)
Wireless Expansion Slot1 x M.2 Key E 2230, populated with the included wireless module
USB Type-A Ports4 x USB 3.2 Gen 2 Type-A
USB Type-C Port1 x USB Type-C for data and recovery; no display output
Ethernet1 x Gigabit Ethernet
Display Output1 x DisplayPort 1.2 with MST
Camera Connectors2 x 22-pin MIPI CSI-2
Expansion Header40-pin: UART, SPI, I2S, I2C and GPIO
Other Headers12-pin button header; 4-pin fan header
Power ConnectorDC barrel jack, 5.5 mm x 2.5 mm
Included Power Supply19 V DC power supply
Developer Kit Dimensions103 mm x 90.5 mm x 34.77 mm, including feet and thermal solution

945-13766-0000-000 Overview

The NVIDIA Jetson Orin Nano Super Developer Kit provides a compact platform for developing generative AI, robotics and computer vision applications at the edge.

The kit combines a Jetson Orin Nano 8GB module with a reference carrier board. It uses an NVIDIA Ampere GPU with 1024 CUDA cores and 32 Tensor Cores, a six-core Arm Cortex-A78AE CPU and 8GB of 128-bit LPDDR5 memory.

Supported Super software and power settings enable up to 67 INT8 TOPS and 102GB/s of memory bandwidth. NVIDIA JetPack SDK provides the software environment for development.

The carrier board provides USB, Gigabit Ethernet, DisplayPort, camera and expansion interfaces. A microSD card or NVMe SSD is required separately. The published 7W to 25W range describes module power modes.

945-13766-0000-000 Datasheet

Open PDF

Shipping & Payment

Shipping

Shipping MethodFreight & Account OptionsEstimated Transit Time
DHL / FedEx / UPS ExpressPrepaid (quoted by weight & destination) or Buyer’s Courier Account (Freight Collect)2–5 business days (in-stock items)
Air Cargo / Consolidated FreightQuoted for heavy reels, trays, or bulk production orders5–10 business days

Final freight costs, trade terms (EXW, FCA, DAP/DDP), and ship dates are confirmed on your formal quote or accepted order. Delivery dates are estimates unless agreed in writing.

Payment

Payment MethodTerms & Details
T/T (Wire Transfer)Full cleared payment before shipping unless approved otherwise. Any bank fees are shown before order acceptance.
Credit Card / PayPalSubject to order confirmation. Standard payment processing fees apply.
Approved NET TermsAvailable for repeat corporate accounts after credit review and written approval.

Warranty & Packaging

Warranty

What Is Covered
Covers counterfeit, wrong, or defective parts. The warranty period is stated on your quote and our Terms of Service.
How to Report an Issue
Send your order number, part number, lot/date code, photos, and any test reports. Keep all original parts, labels, and packaging, and get our return approval before shipping anything back.
Replacement & Refunds
We will replace confirmed faulty parts, or refund the part cost if a replacement is not available. Buyer ordering mistakes, canceled projects, and unused extra stock cannot be returned.

Packaging & ESD Protection

Manufacturer-labeled moisture-barrier bag for electronic components
Full Reels & Bulk Orders (Factory-Sealed)

Shipped in original, unopened factory reels, trays, or tubes with original manufacturer labels and moisture seals.

ESD shielding bags used for electronic component packaging
Small Lots, Cut Tape & Samples (ESD Repackaged)

Handled at ESD-safe stations and sealed in anti-static or moisture-barrier bags with desiccant and a humidity indicator card (HIC).

Electronic component packages inside a shipping carton with protective cushioning
Export Shipping Box

Padded with anti-static cushioning and packed in strong export cartons to prevent damage during air transit.

Frequently Asked Questions

How do I request a quote?

Submit your part number, brand, quantity, and target delivery date via Request a Quote on this page. You can also send your inquiry directly by email to bill@ace-ic.com, or reach us via WhatsApp or phone at +86 180 2874 7827. Include any date-code, packaging (reel/tray/tube), or testing notes so we can quote accurately.

Can I order a small quantity or samples?

Yes, for many stocked items. Send us your required quantity and we will confirm the available MOQ, order multiples, and packaging format.

Can I ask for specific packaging, lot, or date codes?

Yes. List your required packaging (full reel, cut tape, tray, or tube) and acceptable date-code range in your RFQ, and we will confirm exact matching stock before you order.

Can I request inspection or traceability documents?

Yes. Tell us what certificates (such as CoC) or lab tests (X-Ray, decapsulation, solderability) you need in your RFQ. We will confirm availability, test costs, and extra lead time before you approve.

How do you make sure parts are original?

We source from authorized channels and vetted partners, backed by incoming label checks, visual inspection, and third-party lab testing upon request.

Can I send a full BOM list instead of asking one by one?

Yes. For multi-item lists or turnkey PCBA orders, send your BOM file via our Contact page or email bill@ace-ic.com for a consolidated quote.

Request Quote

ACE Components navigation